GB/T 36282-2018 英文版/English/翻譯/電動汽車用驅動電機系統 電磁兼容性要求和試驗方法
Electromagnetic Compatibility Requirements and Test Methods of Drive Motor System for Electric Vehicles
1 SCOPE
This Standard specifies the electromagnetic compatibility requirements and test methods of drive motor system for electric vehicles.
This Standard applies to the drive motor systems for battery electric vehicles, hybrid electric vehicles and fuel cell electric vehicles.
This Standard considers the high voltage (HV) power supply system component as a typical fully-shielded system.
Note: Generally, the EV power supply system consists of two types, i.e. common unshielded low voltage (LV) systems of which the typical structure feature is unshielded, and HV systems of which the typical structure feature is shielded.
2 NORMATIVE REFERENCES
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 18384.3-2015 Electrically propelled road vehicles-Safety specifications-Part 3: Protection of persons against electric shock
GB/T 18655-2010 Vehicles boats and internal combustion engines-Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers
GB/T 19951 Road vehicles-Test methods for electrical disturbances from electrostatic discharge
GB/T 21437.2-2008 Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
GB/T 29259 Road vehicle-Electromagnetic compatibility terminology
GB/T 33014.1 Road vehicles-Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy-Part 1: General
GB/T 33014.2 Road vehicles-Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy-Part 2: Absorber-lined shielded enclosure
GB/T 33014.4 Road vehicles-Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy-Part 4: Bulk current injection (BCI)
1範圍
本標準規定了電動汽車用驅動電機系統電進兼容性要求和試驗方法，
本標準適用於純電動汽車、混合動力電動汽車和燃料電池電動汽車用駔動電機系統.
本標準對於HV(高壓）電撕系統部件視為典甩的全屏蔽系統，
迕：電動汽車電渥系統通常分為2種類型:第一種普通LV(低壓）系統,其典型結構特點為非屏蔽,第二種HV系統，其典型結構特點為屏蔽.
2規範性引用文件
下列文件對於本文件的應用是必不可少的凡是注日期的引用文件,僅注日期的版本適用於本文 件.凡是不注日期的引用文件，其最新版本(包括所有的修改填)適用於本文件.
GB/T 18384.3—2015電動汽車安全委求第3部分:人員觸電防護
GB/T 18655—2010車輛、船和內燃機無線電《擾特性用於保護車栽接收機的限值和測量方法
GB/T 19951道路車輛靜電放電產生的電騷擾試驗方法
GB/T 21437.2—2008道路車輛由傳導和耦合引起的電》擾第2部分:沿電源線的電瞬態傳導
GB/T 29259道路車輛電磁兼容術語
GB/T 33014.1進路車輛電氣/電子部件對窄帶鎘射電磁能的抗擾性試驗方法 般規定
GB/T 33014.2進路車輛電氣/電子部件對窄帶箱射電磁能的抗擾性試驗方法 波暗室法
GB/T 33014.4道路車輛電氣/電子部件對窄帶輻射電磁能的抗擾性試驗方法 電流注入(BC1〉法
3術語和定義
GB/T 29259界定的以及下列術語和定義適用於本文件，
受試設備 equipment under test (EUT)
本標準特指電動汽車用驅動電機系統.
低電壓 low voltage; LV
對應於GB/T 18384.3—2015規定的A級電壓