隨著目前新基建的加速普及,網絡布線對傳輸性能的要求越來越高,綜合數據發現,Cat8 八類網線逐漸成為數據中心綜合布線系統的主流Cable類產品之一,今天我們就一起科普:
CAT8網線 (2GHz, 40Gbps)
Cat8 八類網線是最新一代雙屏蔽(SFTP)的網絡跳線,它擁有兩個導線對,可支持2000MHz的帶寬,且傳輸速率高達40Gb/s,但它最大傳輸距離僅有30m,故一般用於短距離數據中心的伺服器、交換機、配線架以及其他設備的連接。
The newly upgraded Cat8 Ethernet cable supports up to 2000MHz and speeds up to 40Gbps over 20 meters. It is fully backward compatible with all the previous categories. With inner aluminum foil wrapped around pairs and outer CCAM braid shielding, the Cat8 Ethernet cable can prevent from electromagnetic and radio frequency interference very well.
Cat8 八類網線的相關標準由美國通信工業協會(TIA )TR-43委員會於2016年正式發布,具體如下:
1.符合IEEE 802.3bq 25G / 40GBASE-T標準,規定了Cat8 八類網線的最小傳輸速率,可支持25 Gbps和40 Gbps的網絡布線。
2.符合ANSI / TIA-568-C.2-1標準,規定了Cat8 八類網線的通道和永久鏈路,並包含電阻不平衡、TCL和ELTCTL的限制。
3.符合ANSI / TIA-1152-A標準,規定了Cat8 八類網線現場測試儀測量和精度要求。
4.符合ISO / IEC-11801標準,規定了I/II 類Cat8 八類網線的通道和永久鏈路。
目前按照規範設計的三種結構
八類網線第一種結構:每對屏蔽+鋁箔總屏蔽+外被
八類網線第二種結構:每對屏蔽+編織總屏蔽+外被
八類網線第三種結構:每對屏蔽+鋁箔總屏蔽+編織總屏蔽+外被
在ISO / IEC-11801標準裡,根據通道級別將Cat8 八類網線分為了I 類和II類,其中I類Cat8 八類網線屏蔽類型為U/FTP和F/UTP,能向後兼容Cat5e、Cat6、Cat6a的RJ45連接器接口;II類Cat8 八類網線屏蔽類型為F/FTP 或 S/FTP,可向後兼容TERA或GG45連接器接口。
Cat8 八類網線與超五類網線、六類網線、超六類網線及七類/超七類網線的區別
目前市面上常見的網線有超五類網線、六類網線、超六類網線、七類網線及超七類網線這五種類型,那麼Cat8 八類網線與這些網線之間存在著怎樣的區別呢?下面就是以上網線的參數表:
Classes and categoriesThe standard defines several link/channel classes and cabling categories of twisted-pair copper interconnects, which differ in the maximum frequency for which a certain channel performance is required:
Class A: link/channel up to 100 kHz using Category 1 cable/connectors
Class B: link/channel up to 1 MHz using Category 2 cable/connectors
Class C: link/channel up to 16 MHz using Category 3 cable/connectors
Class D: link/channel up to 100 MHz using Category 5e cable/connectors
Class E: link/channel up to 250 MHz using Category 6 cable/connectors
Class EA: link/channel up to 500 MHz using Category 6A cable/connectors (Amendment 1 and 2 to ISO/IEC 11801, 2nd Ed.)
Class F: link/channel up to 600 MHz using Category 7 cable/connectors
Class FA: link/channel up to 1000 MHz using Category 7A cable/connectors (Amendment 1 and 2 to ISO/IEC 11801, 2nd Ed.)
Class I: link/channel up to 2000 MHz using Category 8.1 cable/connectors (specification under development)
Class II: link/channel up to 2000 MHz using Category 8.2 cable/connectors (specification under development)
The standard link impedance is 100 Ω (The older 1995 version of the standard also permitted 120 Ω and 150 Ω in Classes A−C, but this was removed from the 2002 edition).
The standard defines several classes of optical fiber interconnect:
OM1: Multimode fiber type 62.5 µm core; minimum modal bandwidth of 200 MHz·km at 850 nm
OM2: Multimode fiber type 50 µm core; minimum modal bandwidth of 500 MHz·km at 850 nm
OM3: Multimode fiber type 50 µm core; minimum modal bandwidth of 2000 MHz·km at 850 nm
OM4: Multimode fiber type 50 µm core; minimum modal bandwidth of 4700 MHz·km at 850 nm
OM5: Multimode fiber type 50 µm core; minimum modal bandwidth of 4700 MHz·km at 850 nm and 2470 MHz·km at 953 nm
OS1: Single-mode fiber type 1 dB/km attenuation at 1310 and 1550 nm
OS1a: Single-mode fiber type 1 dB/km attenuation at 1310, 1383, and 1550 nm
OS2: Single-mode fiber type 0.4 dB/km attenuation at 1310, 1383, and 1550 nm
由於 CAT8 / I 類和 II 類信道的長度限制為 30m,它主要應用於數據中心,其中不需要傳統的 100m 完整布線,骨幹布線和接入點布線也可能成為常規企業大樓中有趣的應用,許多大樓的骨幹小於 30 米,室內的許多接入點不需要很長的電纜,可以預見,接入點的速度將來會超過 10Gbit / s,因此需要比 CAT6A 更好的布線, CAT8 / I 類和 II 類就是目前最佳的選擇。
歡迎投稿,如果您有願意分享給行業的技術文章,請聯絡我們,謝謝!
接受」投稿訊息「中
更多關於最新的線纜行業發展訊息,請關注我們的微信公眾號!我們將第一時間搜尋到行業前沿訊息和您一起分享!