美國MF-1100PRO是Multi Frequency Company生產的新型金屬探測器電子設備採用收發器技術。 它發送波並同時接收它們。 它通過感應金屬的頻率來檢測金屬。 每種金屬都有其獨特的頻率,這取決於其物理結構和化學反應。 當金屬在地下時,它將受到地球電磁場的影響。 這些金屬受到來自不同來源的土壤靜電場的影響,這些來源包括發電站,廣播和電視傳輸站,衛星,閃電以及其他靜電和發電機。
產品描述:
美國MF-1100PRO是Multi Frequency Company生產的新型金屬探測器。 金屬探測器電子設備採用收發器技術。 它發送波並同時接收它們。 它通過感應金屬的頻率來檢測金屬。 每種金屬都有其獨特的頻率,這取決於其物理結構和化學反應。 當金屬在地下時,它將受到地球電磁場的影響。 這些金屬受到來自不同來源的土壤靜電場的影響,這些來源包括發電站,廣播和電視傳輸站,衛星,閃電以及其他靜電和發電機。
該設備通過影響金屬和地下目標的靜電場來檢測金屬和地下目標,其中的金屬波是從設備本身發出的,這些波作為放大器到達現場並漂浮在地面上,以方便進行長距離檢測過程。 該設備接收放大後的信號並直接準確定位目標。
經過大量實驗,我們達到了控制從設備到地面發射的波長和寬度以及發射頻率的概念,因此用戶可以輕鬆,準確地選擇指定的搜索距離和深度,最高可達90%。
美國MF-1100PRO大範圍金屬探測儀器深圳市匯成探測科技有限公司代理
product description:
The American MF-1100PRO is a new type of metal detector produced by Multi Frequency Company. The metal detector electronics uses transceiver technology. It sends waves and receives them at the same time. It detects metal by sensing its frequency. Each metal has its own unique frequency, which depends on its physical structure and chemical reaction. When metal is underground, it will be affected by the electromagnetic field of the earth. These metals are affected by soil electrostatic fields from different sources, including power stations, radio and television transmission stations, satellites, lightning, and other static electricity and generators.
The device detects metal and underground targets through the electrostatic field that affects them. The metal waves are emitted from the device itself. These waves reach the scene as an amplifier and float on the ground to facilitate the long-distance detection process. The device receives the amplified signal and directly locates the target accurately.
After a lot of experiments, we have reached the concept of controlling the wavelength and width of the emission from the device to the ground and the emission frequency, so users can easily and accurately select the specified search distance and depth, up to 90%.
技術參數:
搜索操作:搜索黃金,金屬,瓷器玉石
搜索系統:接收被埋目標的靜電場
操作處理器:微控制器
處理器頻率:20.000 MHz
處理類型:數位訊號處理(DSP)
工作頻率:1-30KHz
搜索深度程序:具有深度控制功能的 20 米
探測範圍程序:800米直徑與水平控制功能
功耗:120mA
設置方法:
主機安裝好接收天線和傳輸天線,把左右天線拉到極限,手柄對準凹槽插進去旋鈕扭緊,濾波器安裝好天線後插地,鑰匙開關打開,上面指示燈會亮,此時主機的濾波器接收指示燈會亮,表示儀器開始工作,見下圖:按下主機右側總開關,然後按住主機開關鍵 2 秒以上,顯示屏出現主菜單。