【不鏽鋼屏風共有兩種加工焊接成型工藝】
[Stainless steel screen has two kinds of processing and welding forming process]
1、點焊。有縫，直接用點的方式焊接固定。這種加工工藝通常在距離比較遠的地方採用這種形式加工，如果拋光難度過大，拋光工具無法深度打磨拋光，造成人眼能直接看到焊接點也可以採用點焊工藝。
1.Spot welding. There are seams, which are welded directly by means of points. This kind of processing usually uses this form of processing at a relatively long distance. If the polishing is too difficult, the polishing tool cannot be deeply polished and polished, so that the human eye can directly see the solder joint or use the spot welding process.
2、滿焊。也叫無縫焊接。經打磨拋光後，焊接的地方看不到縫隙。適用於距離較近的場所應用。
2.Full welding. Also called seamless welding. After polishing and polishing, no gaps can be found in the welded place. Suitable for applications in close proximity.
以【加工工藝】分為:
[processing technology]:
1、雷射鏤空切割屏風,通過大型雷射切割機切割鏤空得出一定圖案,再經過表面處理後,真空電鍍著色。
1.The laser cuts the screen and cuts the hollow through a large laser cutting machine to obtain a certain pattern. After the surface treatment, the vacuum plating is colored.
2、焊接拋光加工屏風,用管或板加工成型,經過表面處理後.然後焊接拋光,真空電鍍著色.
2.Welding and polishing the screen, using tube or plate processing, after surface treatment. Then welding polishing, vacuum plating coloring.
以【顏色】可分為：
[color]:
玫瑰金不鏽鋼屏風、鈦金(黑鈦)不鏽鋼屏風、茶色不鏽鋼花格、古銅不鏽鋼屏風、青古銅不鏽鋼屏風及其它顏色的不鏽鋼屏風等，還可以客戶提供色板等。Rose gold stainless steel screen, titanium (black titanium) stainless steel screen, brown stainless steel grid, bronze stainless steel screen, green bronze stainless steel screen and other color stainless steel screen, etc., can also provide customers with swatches.
以【著色工藝】可分為：
[coloring process]:
1.電鍍鈦不鏽鋼屏風；2.水鍍銅不鏽鋼屏風；3.氟碳漆不鏽鋼屏風；4.噴漆不鏽鋼屏風等；5.色油仿銅不鏽鋼屏風等。
1. Electroplated titanium stainless steel screen; 2. Water-plated copper stainless steel screen; 3. Fluorocarbon paint stainless steel screen; 4. Painted stainless steel screen, etc.; 5. Color oil imitation copper stainless steel scree
不鏽鋼屏風的安裝要點：
Stainless steel screen installation points:
1、定點定位：首先要測量出屏風安裝的位置，找出天花板上觸角（屏風一端有做固定觸角）對應的孔位。用鑽頭打穿，並將屏風觸角切至1.5cm長度。
1. Fixed point positioning: Firstly, measure the position of the screen installation and find the corresponding hole position on the ceiling (the fixed end tentacles on one end of the screen). Drill through the drill bit and cut the screen tentacles to a length of 1.5 cm.
2、屏風入位：兩個人（屏風很重，需要兩個人配合）將屏風觸角斜插進打好的孔位，讓屏風固定好頂端後再將底端矯正。並檢查屏風是否有偏位。
3. The screen is in place: two people (the screen is very heavy, need two people to cooperate) to insert the screen tentacles obliquely into the punched hole position, so that the screen is fixed at the top and then the bottom end is corrected. Also check if the screen is biased.
3、打膠固定：屏風和地面及牆面用透明玻璃膠收膠固定，收膠一氣呵成，切忌斷斷續續，不然對接處膠水影響美感。
3. Glue fixation: screen and the ground and the wall with a transparent glass glue to fix the glue, the glue is all in one go, should not be intermittent, otherwise the glue at the docking affects the beauty.