今日推薦：《SOLID STATE TECHNOLOGY》
Solid State Technology is having ISSN 0038-111X (online), monthly international journal, being published in the months of January, February, March, April, May, June, July, August, September, October November, December and processed papers will be forwarded for inclusion in the SCOPUS database.
Solid State Technology is committed to prompt evaluation and publication of fully accepted papers. To maintain a high-quality publication, all submissions undergo a rigorous review process. Characteristics of the peer review process are as follows:
Simultaneous submissions of the same manuscript to different journals will not be tolerated.
Manuscripts with contents outside the scope will not be considered for review.
Papers will be refereed by at least 3 or 4 experts (reviewers) as suggested by the editorial board in which 01 from India and rest 02 or 03 from overseas.
In addition, Editors will have the option of seeking additional reviews when needed.
Authors will be informed when Editors decide further review is required. All publication decisions are made by the journal’s Editors-in-Chief on the basis of the referees』 reports (reviewers report).
Authors of papers that are not accepted are notified promptly.
All submitted manuscripts are treated as confidential documents. All submitted papers will be reviewed by double blind review process.
All manuscripts submitted for publication in Solid State Technology cross-checked for plagiarism software. Manuscripts found to be plagiarized during initial stages of review are out-rightly rejected and not considered for publication in the journal.
In case if a manuscript is found to be plagiarized after publication, the Editor-in-Chief will conduct preliminary investigation, may be with the help of a suitable committee constituted for the purpose. If the manuscript is found to be plagiarized beyond the acceptable limits, the journal will contact the author’s Institute / College / University and Funding Agency, if any.
CiteScore ：
中科院SCI期刊分區：（之前小逐夢2020年推送的時候還查詢到在2020年中科院分區名單，但2021年已經沒有了）
可以肯定的是，從愛思唯爾下載2021年1月8日公布的EI源刊名單，第4519行就是。
EI源刊名單：
https://www.elsevier.com/solutions/engineering-village/content/compendex
歷年影響因子：
WOS檢索收錄查詢：
Institutional Subscription: Educational institutions can email us to subscription@solidstatetechnology.us Kindly note that government institutions or organizations from under develop countries can apply for free subscription. We also provides financial and educational support to such institutions.
Refereed Publication: Referred Journal
Review Process: Double Blind
Publication Fee: Free
Media Type(s): Online
Language: Text in English; Summaries in English
Subscription Price: Contact Journal Management for Subscription
Circulation: 6854 Unspecified
Subject Area(Focused But Not Limited to): Materials Science: Materials Chemistry Engineering: Electrical and Electronic Engineering Materials Science: Electronic, Optical and Magnetic Materials Physics and Astronomy: Condensed Matter Physics Special Features: Includes Advertising, Abstracts, Charts, Illustrations, Statistics
Document Availability: Open Access Online
Reprints Available: Yes, Contact Publisher
Back Issues Available: Only to Subscribers
Abstracting and Indexing: Google Scholar; SCOPUS; Ei Compendex
機構訂閱：教育機構可以通過電子郵件將我們發送至subscription@solidstatetechnology.us。請注意，發展中國家以下的政府機構或組織可以申請免費訂閱。我們還為此類機構提供財務和教育支持。
出版物：推薦期刊
審閱過程：雙盲
媒體類型：在線
語言：英文文本；英文摘要
價格：訂閱
發行的聯繫期刊管理：未指定
主題領域（重點但不限於）：材料科學：材料化學工程：電氣與電子工程材料科學：電子，光學和磁材料物理與天文學：凝聚態物理特殊功能：包括廣告，摘要，圖表，插圖，統計
文檔可用性：開放獲取在線
重印版本：是，請與發行商聯繫發行
問題：僅提供給訂閱者
摘要和索引：Google學術搜索； SCOPUS; Ei Compendex
Solid State Technology is having ISSN 0038-111X (online), monthly international journal, being published in the months of January, February, March, April, May, June, July, August, September, October November, December since year 2012 and processed papers will be forwarded for inclusion in the Scopus database. It is academic, online, open access (abstract), peer reviewed international journal. The aim of the journal is to:
disseminate original, scientific, theoretical or applied research in the field of Engineering and allied fields.
dispense a platform for publishing results and research with a strong empirical component.
aqueduct the significant gap between research and practice by promoting the publication of original, novel, industry-relevant research.
seek original and unpublished research papers based on theoretical or experimental works for the publication globally.
publish original, theoretical and practical advances in Computer Science & Engineering, Information Technology, Electrical and Electronics Engineering, Electronics and Telecommunication, Mechanical Engineering, Civil Engineering, Textile Engineering and all interdisciplinary streams of Engineering Sciences.
impart a platform for publishing results and research with a strong empirical component.
create a bridge for significant gap between research and practice by promoting the publication of original, novel, industry-relevant research.
solicit original and unpublished research papers, based on theoretical or experimental works.
SCOPESolid State Technology covers all topics of all engineering branches. Some of them are Computer Science & Engineering, Information Technology, Electronics & Communication, Electrical and Electronics, Electronics and Telecommunication, Civil Engineering, Mechanical Engineering, Textile Engineering and all interdisciplinary streams of Engineering Sciences.
目的與範圍目標自2012年以來，Solid State Technology每月出版一期國際月刊ISSN 0038-111X（在線），並於12月出版，並在11月，12月和11月進行處理。論文將被轉發到Scopus資料庫中。它是學術性，在線，開放訪問（摘要），同行評審的國際期刊。該雜誌的目的是：
傳播工程和相關領域的原始，科學，理論或應用研究。
分配具有強大經驗成分的發布結果和研究平臺。
通過促進原創性，新穎性，與行業相關的研究的發表，彌合研究與實踐之間的重大鴻溝。
尋求基於理論或實驗著作的原創和未發表的研究論文，以在全球範圍內發表。
在計算機科學與工程，信息技術，電氣與電子工程，電子與電信，機械工程，土木工程，紡織工程以及工程科學的所有跨學科領域中發表原始，理論和實踐方面的進展。
提供具有強大經驗成分的發表結果和研究平臺。
通過促進原創，新穎，與行業相關的研究的出版，為研究與實踐之間的巨大鴻溝搭建橋梁。
徵集基於理論或實驗成果的原始和未發表的研究論文。
範圍固態技術涵蓋了所有工程部門的所有主題。其中一些是計算機科學與工程，信息技術，電子與通信，電氣與電子，電子與電信，土木工程，機械工程，紡織工程以及工程科學的所有跨學科流。
Paper TopicsPhysics Topics
Astrophysics, Fusion and Plasma Physics
Nanoscience and Nanotechnology
Condensed Matter and Materials Physics
Energy Systems
Biophysics
Microfluidics and Microsystems
Optical Physics and Quantum Information Science
Atomic, Molecular and Optical Physics
Experimental and Observational Astrophysics and Cosmology
Chemistry Topics
Developments in Atomic Layer Deposition
Catalysis and Catalytic Materials
Nanotoxicology in the Environment
Nanoreactors
Chemical Neuroscience
Behavioral Research in Biochemistry
Atmospheric Chemistry
Enzymology
Thermoelectricity and Materials
Chemical Process Intensification
Enhanced Performance Separators
Bioconjugates in Chemical Biology
Chemical Toxicology
Adverse Outcome Pathways
Artificial Organic Tissues
Battery Science
Molecular Function and Design
Chemistry of Photons
Properties of Materials and Devices
Climate Chemistry
Physical Chemistry
Pesticides and Fertilizers
Bonding of Fluorine and Inert Gases
Corrosion Prevention Methods
Ionization Methods in Mass Spectrometry
Beryllium and Its Effect on Metals
Ionic and Covalent Bonds
Silicon as a Semiconductor in Cosmetic Surgery
Nuclear Fusion as a Useful Technology
Biological and Synthetic Worlds
The Potential of Spun Sugar Strands in Medicine
Theory & Computation in Analysis
Organic Chemistry
Analysis of Residues in Food
Microbial Factories as a Cause of the Shortage of Raw Metals
Genetically Modified Crops
ACS Applied Materials and Interfaces
Metal Oxides in Electronics
The Importance of Biomacromolecules
Hydrophobic-Hydrophilic Surfaces
Environmentally-friendly Plastics
Advanced Use of Hydrogen
Biocomputing and Big Data in Chemical Research
Chemistry of Adhesives: Recent Developments
Medicinal Chemistry Research: Important Trends
Chemistry of Seawater and Its Effect on Cloud Formation
Bioluminescence
Engineering Topics
Agricultural And Bioresources Engineering
Agricultural Engineering
Chemical Engineering
Civil Engineering
Communications Technology
Computer Engineering
Electrical Electronics Engineering
Electrical Engineering
Industrial And Production Engineering
Mechanical Engineering
Petroleum Engineering
Computer Science Engineering
Electronics and Communication Engineering
Information Technology Engineering
Aeronautical Engineering
Mining engineering
Biochemical engineering
Electrical and Instrumentation Engineering
Metallurgical Engineering
論文主題物理專題
天體物理學，聚變和等離子體物理
納米科學與納米技術
凝聚態物質與材料物理
能源系統
生物物理學
微流體與微系統
光學物理學與量子信息科學
原子，分子和光學物理
實驗和觀測天體物理學與宇宙學
化學專題
原子層沉積的發展
催化和催化材料
環境中的納米毒理學
納米反應器
化學神經科學
生物化學行為研究
大氣化學
酶學
熱電與材料
化學過程強化
增強型性能分離器
化學生物學中的生物綴合物
化學毒理學
不良結果途徑
人造有機組織
電池科學
分子功能與設計
光子化學
材料和器件的特性
氣候化學
物理化學
農藥和肥料
氟與惰性氣體的鍵合
防腐方法
質譜法中的電離方法
鈹及其對金屬的影響
離子鍵和共價鍵
矽作為美容外科手術中的半導體
核聚變是一種有用的技術
生物與合成世界
紡絲糖鏈在醫學中的潛力
分析中的理論與計算
有機化學
食品中殘留物分析
微生物工廠是造成原材料短缺的原因
轉基因作物
ACS應用材料和界面
電子中的金屬氧化物
生物大分子的重要性
疏水性表面
環保塑料
氫氣的高級使用
化學研究中的生物計算和大數據
膠粘劑化學：最新進展
藥物化學研究：重要趨勢
海水化學及其對雲形成的影響
生物發光
工程主題
農業與生物資源工程
農業工程
化學工程
土木工程
通訊技術
計算機工程
電氣電子工程
電機工程
工業與生產工程
機械工業
石油工程師
計算機科學工程
電子與通訊工程
信息技術工程
航空工程
採礦工程
生化工程
電氣與儀器工程
冶金工程
Instructions for AuthorsIt is academic, online, open access (abstract), peer reviewed international journal. It aims to publish original, theoretical and practical advances in Computer Science & Engineering, Information Technology, Electrical and Electronics Engineering, Electronics and Telecommunication, Mechanical Engineering, Civil Engineering, Textile Engineering and all interdisciplinary streams of Engineering Sciences.
The aim of the journal is to disseminate original, scientific, theoretical or applied research in the field of Engineering and allied fields, to dispense a platform for publishing results and research with a strong empirical component, to aqueduct the significant gap between research and practice by promoting the publication of original, novel, industry-relevant research, to seek original and unpublished research papers based on theoretical or experimental works for the publication globally, to publish original, theoretical and practical advances in Computer Science & Engineering, Information Technology, Electrical and Electronics Engineering, Electronics and Telecommunication, Mechanical Engineering, Civil Engineering, Textile Engineering and all interdisciplinary streams of Engineering Sciences, to impart a platform for publishing results and research with a strong empirical component, to create a bridge for significant gap between research and practice by promoting the publication of original, novel, industry-relevant research, to solicit original and unpublished research papers, based on theoretical or experimental works.
Papers for the regular issues of the journal can be submitted, round the year, electronically at editor After the final acceptance of the paper, based upon the detailed review process, the paper will immediately be published online. However, assignment of the paper to an specific Volume / Issue (see archive) of the Journal will be taken up by the Editorial Board later; and the author will be intimated accordingly. For Theme Based Special Issues, time bound Special Call for Papers will be announced and the same will be applicable for that specific issue only.
Submission of a paper implies that the work described has not been published previously (except in the form of an abstract or academic thesis) and is not under consideration for publication elsewhere. The submission should be approved by all the authors of the paper. If a paper is finally accepted, the authorities, where the work had been carried out, shall be responsible for not publishing the work elsewhere in the same form. Paper, once submitted for consideration in Solid State Technology, cannot be withdrawn unless the same is finally rejected.
Author(s) be sure that:
Plagiarism Check: Good quality plagiarism software/ tool (Turnitin / iThenticate) will be used to check similarity that would not be more than 20% including reference section. In the case of exclusion of references, it should be less than 5%.
Quality Check: All submitted paper should be cutting edge, result oriented, original paper and under the scope of the journal that should belong to the engineering and technology area. In the paper title, there should not be word 『Overview/brief/ Introduction, Review, Case study/ Study, Survey, Approach, Comparative, Analysis, Comparative Investigation, Investigation』.
Paper Submission Criteria: : Any one author cannot submit more than 05 papers for the same volume/issue.
Review Criteria: This journal uses double-blind review process, which means that both the reviewer (s) and author (s) identities concealed from the reviewers, and vice versa, throughout the review process. All submitted manuscripts are reviewed by three reviewer one from India and rest two from overseas. There should be proper comments of the reviewers for the purpose of acceptance/ rejection. There should be minimum 01 to 02 week time window for it.
eCopyright: All authors will submit ecopyright to the Solid State Technology.
Template: All accepted papers should be formatted as per Journal Template. Be sure that Each author profile (min 100 word) along with photo should be included in the final paper/camera ready submission. It is be sure that contents of the paper are fine and satisfactory. Author (s) can make rectification in the final paper but after the final submission to the journal, rectification is not possible. In the formatted paper, volume no/ issue no will be in the right top corner of the paper. In the case of failure, the papers will be declined from the database of journal and publishing house.
Updation in the Paper: Please be sure that
Each author profile along with photo (min 100 word) has been included in the final paper.
Final paper is prepared as per journal the template.
Contents of the paper are fine and satisfactory. Author (s) can make rectification in the final paper but after the final submission to the journal, rectification is not possible.
Copyright Property: After the publication, conference proceeding will be property of publishing house and journal.
Required Time for Endorsement: It will take minimum 01 to 02 weeks.
Manuscript Submission
Submission of a manuscript implies: that the work described has not been published before; that it is not under consideration for publication anywhere else; that its publication has been approved by all co-authors, if any, as well as by the responsible authorities – tacitly or explicitly – at the institute where the work has been carried out. The publisher will not be held legally responsible should there be any claims for compensation.
Permissions
Authors wishing to include figures, tables, or text passages that have already been published elsewhere are required to obtain permission from the copyright owner(s) for both the print and online format and to include evidence that such permission has been granted when submitting their papers. Any material received without such evidence will be assumed to originate from the authors.
它是學術性，在線，開放訪問（摘要），同行評審的國際期刊。它的目的是在計算機科學與工程，信息技術，電氣與電子工程，電子與電信，機械工程，土木工程，紡織工程以及工程科學的所有跨學科領域中發表原創，理論和實踐方面的進展。
該雜誌的目的是傳播工程和相關領域的原始，科學，理論或應用研究，為發布具有強大經驗成分的結果和研究提供平臺，以彌補研究與實踐之間的巨大差距。促進原創，新穎，與行業相關的研究的出版，尋求基於理論或實驗著作的原創和未發表的研究論文，以在全球範圍內進行出版，在計算機科學與工程，信息技術，電氣和電子領域發表原創，理論和實踐的進展電子工程，電子與電信，機械工程，土木工程，紡織工程以及工程科學的所有跨學科流，建立一個具有強大經驗成分的成果發表和研究平臺，通過促進原創，新穎，與行業相關的研究的發表，徵求原創和未發表的研究論文，為研究與實踐之間的巨大差距架起一座橋梁。理論或實驗作品。
提交論文意味著所描述的作品以前沒有發表過（除非以摘要或學術論文的形式出現），也沒有考慮在其他地方發表。該論文應得到論文所有作者的認可。如果文件最終被接受，進行工作的主管部門應負責不以相同的形式在其他地方發表該工作。提交至固態技術中審議的論文，除非最終拒絕，否則無法撤回。
作者應確保：
抄襲檢查：優質的查重檢測軟體/工具（Turnitin / iThenticate）將用於檢查相似度（包括參考部分）不超過20％。在排除參考文獻的情況下，其應小於5％。
質量檢查：所有提交的論文應為前沿，注重結果的原始論文，並應屬於工程技術領域的期刊範圍內。在論文標題中，不應有「概述/簡介/簡介，複習，案例研究/研究，調查，方法，比較，分析，比較調查，調查」一詞。
論文提交標準：：任何一位作者針對同一卷/每期都不能提交超過05篇論文。
審閱標準：該期刊使用雙盲審閱過程，這意味著在整個審閱過程中，審閱者和作者的身份都不會對審閱者隱瞞，反之亦然。所有提交的稿件均由三名來自印度的審稿人審閱，其餘兩名來自國外。為了接受/拒絕，評論者應該有適當的評論。至少應有01至02周的時間窗口。
電子版權：所有作者都將向固態技術提交電子版權。
模板：所有接受的論文都應按照「日記本模板」進行格式化。確保最終論文/相機準備投稿中應包括每個作者個人資料（至少100個字）和照片。確保紙張內容良好且令人滿意。作者可以在最終論文中進行更正，但在最終向期刊提交後，無法進行更正。在格式化的紙張中，卷號/發行號將在紙張的右上角。如果出現故障，論文將從期刊和出版社的資料庫中刪除。
論文更新：請確保
每篇作者簡介以及照片（至少100個字）都已包含在最終論文中。
根據期刊模板準備最終論文。
紙的內容很好並且令人滿意。作者可以在最終論文中進行更正，但在最終向期刊提交後，無法進行更正。
版權財產：出版後，會議錄將為出版社和期刊的財產。
要求的背書時間：至少需要01到02周。
提交稿件
提交稿件意味著：所描述的作品之前未發表過；沒有考慮在其他任何地方出版；其出版物已獲得所有合作作者（如果有）以及負責工作的主管當局的默許或明確批准。如果有任何索賠要求，發布者將不承擔法律責任。
許可
希望包括已經在其他地方發表過的圖形，表格或文本段落的作者，必須從版權所有者那裡獲得印刷和在線格式的許可，並提供提交此類許可時已經獲得此類許可的證據。文件。沒有此類證據的任何材料都將被認為是來自作者。
投稿流程以及逐夢團隊提供的服務有：
①作者寫好論文，詢問逐夢微信客服索要投稿期刊的格式模板；
②論文寫作完成，提交至逐夢微信客服或者郵箱pursuemacau@126.com
③註明自己需要投稿的期刊名字；
④逐夢學術團隊初審，並使用Turnitin進行調整；
（也可以是同學寫作完之後提交論文同時一起提交Turnitin查重報告。如果逐夢學術團隊進行Turnitin查重則這部分額外費用需要作者給予）
⑤出版社編輯審稿（大概需要3-5工作日）；
⑥發送出版社的錄用通知，作者提交郵寄地址、發表的版面費用。
⑦等待郵寄與出版、檢索，完成發表。
以上所有流程與工作，所需費用僅20000RMB/篇（Turnitin查重費另計或作者附上）！名額有限，錯過了又要等下個月出版了哦！
期刊版面所剩不多，尤其到了年前，很多人投稿。
要申請碩士博士，需要課題結題成果，請儘早準備。
第一次發表論文覺得心裡沒底兒，也可以通過小逐夢尋找專業相近匹配的博士學長或者學姐幫忙修改（小額有償服務）。
周末以及凌晨等非工作時間請留言，看到會回復。
需要請聯繫我們的逐夢小可愛/小帥哥微信：（可提供翻譯服務）
為了更加集中、更好地讓學弟妹獲得期刊徵稿資訊，小逐夢推出了英文期刊的徵稿交流群，歡迎大家登陸QQ掃碼加群喲！
QQ群內不定期發布EI期刊、SSCI期刊、加拿大Clausius Scientific Press出版社、英國Francis Academic Press、美國英文期刊以及本學術資訊中心主辦的學術徵稿活動（如上次中葡論壇徵稿活動等）。歡迎各位朋友關注支持。
後續期刊合作也會增加。
可以關注我們的資訊中心平臺。
祝大家都能早日發表成功！
本公眾號可提供的相關輔導提升背景類服務：（待續更新，可以點擊之後轉跳閱讀）
碩博申請｜逐夢推出全新澳門留學申請輔導服務，與你一起逐夢澳門！
重磅消息 | 逐夢推出2021年春季澳門申請一對一輔導（碩博士均可，名額有限）
碩博申請｜逐夢新增馬來西亞留學申請輔導服務，與你一起逐夢大馬！
逐夢分享 | 2021年馬來西亞高校碩博申請交流群上線啦！（文末附入群方式）
學術分享｜英文期刊徵稿交流群歡迎大家加入
逐夢分享｜逐夢平臺投稿EI（JA）、EI（CA）、外文普刊等論文刊用榜（截至12月25日）
學術徵稿｜Airitilibrary、知網、谷歌學術收錄：國際工程期刊ICJE（月刊，有DOI號）1個月快速出刊！穩定檢索！
學術徵稿｜《現代商業》2021年調價！（有影響因子、全國中文流通經濟類核心期刊）
學術徵稿 | JCR3區SCI《Basic & Clinical Pharmacology & Toxicology》徵集摘要
學術徵稿 | Scopus、INSPEC、中國知網檢索：季刊Informing Science徵稿！
學術徵稿 | 馬來西亞博特拉大學官方期刊徵稿！ESCI+Scopus！2021年6月之後可排期！
學術徵稿 | EI（CA）、Scopus檢索《Lecture Notes in Electrical Engineering》
學術徵稿 | EI（JA）、ESCI期刊《Fluid Dynamics & Materials Processing》徵稿！
學術徵稿 | Scopus、ISTP收錄期刊《Materials Today: Proceedings》徵稿！可由逐夢推薦發表！
學術徵稿 | EI期刊《Key Engineering Materials》徵稿！SCOPUS+EI檢索！可通過逐夢投稿！
學術徵稿｜11本英文普刊徵稿！1個月快速出刊+檢索！雙旦活動優惠來了！
學術徵稿｜加拿大Clausius Scientific Press出版社長期徵稿！1個月快速發表，高達37個資料庫檢索！
學術徵稿 | 《Industrial Engineering and Innovation Management》
學術徵稿 | 《Financial Engineering and Risk Management》（金融工程與風險管理）
學術徵稿 | 《Accounting and Corporate Management》（會計與企業管理）
學術徵稿 | 《Frontiers in Art Research》（藝術研究前沿）ISSN: 2618-1568
學術徵稿｜英國Francis Academic Press長期徵稿！1個月發表周期，CNKI+百度學術收錄！
期刊徵稿｜3本經濟類中文核心期刊徵稿！有影響因子，最快安排本月出刊！
學術徵稿 | 國家級期刊《中國集體經濟》長期徵稿！有影響因子！
學術徵稿 | 社會科學綜合類期刊《今古文創》徵稿！
課程推薦 | 性價比超高的葡語初階班（0-A2）隆重登場！靠譜師姐一對一輔導助你快速提升！
求職就業 | 逐夢推出求職就業輔導課程大禮包啦！（文末附澳門學子求職交流群添加）
共建共享 | 2021年澳門高校申碩申博交流群來襲！（文末附入群方式）
共建共享 | 2021年澳門高校法學專業申請群來襲！傾聽Ada學姐的後高考逆襲的經歷！（文末附入群方式）
共建共享 | 2021年澳城大葡語國家研究報考交流群來襲！（文末附入群方式）
共建共享 | 2021年澳門高校政治學類專業報考交流群來襲！（文末附入群方式）