化學結合水的增加,即(與纖維)以氫鍵相結合水(相對的概念是自由水)的增加,會降低濾水。結合水可能因打漿(打漿產生細小纖維)、使用吸溼性助劑導致。新聞紙漿中化學結合水的水平較低,這或可部分地解釋,為何採用加拿大游離度為100ml的原料漿的新聞紙機,其運行速度可以超過15m/s(3000ft/min),但使用混合漂白針葉木漿和闊葉木漿為原料(化學結合水含量要高得多)的紙機,即使紙漿的游離度高得多,也只能以低得多的速度運行。一塊很厚的凝膠其脫水(很慢),是水化(帶來濾水困難)問題的一個極端例子。
注1:用藍色和括號一起表示內容是通過意譯加上去的。
注2:紙機速度等數據僅供相對參考(可能教材內容更新不夠及時)。
注3:近期有幾位讀者諮詢過CMC等助劑與紙漿一起打漿是否會產生一些負面影響,備課看到這一段,故分享。
原文(出自Biermann's Handbook of Pulp and Paper, 2018)如下:
An increase in chemically bond water (hydrogen-bonded, as opposed to free water) decreases drainage and may result by increased refining, which also generated fines and the use of hygroscopic additives. The low level of chemically bound water in newsprint may partially explain why newsprint machines that use a furnish of 100CSF can operate at speeds in excess of 15m/s (3000ft/min), but machines using mixtures of bleached softwood and hardwood (which have higher levels of chemically bond water) with much higher freeness are limited to much slower speeds. As extreme example of the problems of hydration would be drainage from a thick gel.
濾水系列:
1. 高陽電荷助劑的助濾機理 (9月7日)
2.生物酶處理促進脫水的機理 (9月8日)
3. 陽離子聚合物助劑對不同紙漿保水值的影響 - Part 1 (9月9日)
4. 陽離子聚合物助劑對不同紙漿保水值的影響 - Part 2 (9月10日)
5. 陽離子聚合物助劑對不同紙漿保水值的影響 - Part 3 (9月12日)
6. 打漿度越高,保水值也越高嗎?(9月14日)
7. 越蓬鬆的溼紙頁,是越容易持水呢還是越利於濾水呢?(9月15日)
8. 逮住絮團,絞出水來 (9月16日)
9. 化學結合水問題 (11月23日)
感謝鼓勵!