mason jar snow globe with picture
To make a mason jar snow globe with a picture, start by selecting a clean mason jar and a printed photo that fits inside. Glue the photo and any small waterproof figurines to the inside of the jar's lid using hot glue or epoxy. Fill the jar with distilled water, add a few drops of glycerin to help the glitter float, and sprinkle in glitter for the snow effect. Screw the lid on tightly, seal the edges with hot glue to make it waterproof, and let it dry. Shake gently to activate the snow globe. Use waterproof materials to prevent damage.
snow globe jars diy
To make a DIY snow globe jar, start by gathering materials including a clean glass jar with a tight lid, small waterproof figurines or ornaments, fine glitter, distilled water, glycerin, and a hot glue gun. Glue the figurines securely to the inside of the jar lid using the hot glue gun and let it dry completely. Fill the jar about three-quarters full with distilled water, then add a teaspoon of glitter and a few drops of glycerin to help the glitter suspend and fall slowly. Carefully screw the lid on tightly, ensuring it's sealed to prevent leaks, and you can add extra glue around the edges for security. Shake the jar gently to see the snow effect, and store it upright to keep the scene intact.
mason jar snow globe without glycerin
To make a mason jar snow globe without glycerin, gather these materials: a clean mason jar with a tight lid, distilled water, white craft glue or clear glue, glitter or fake snowflakes, a small waterproof figurine or ornament, and super glue for sealing.
Fill the jar about three-quarters full with distilled water, then add a few drops of white craft glue to help the glitter suspend and fall more slowly—use about 1 teaspoon per cup of water and stir well. Place the figurine inside the jar, then add 1 to 2 tablespoons of glitter, adjusting for the desired snow effect.
Carefully screw the lid on tightly and seal it with super glue around the edges to make it waterproof. Shake the jar to test; if the glitter falls too quickly, add a bit more glue next time. For best results, use room temperature water and store the snow globe away from direct sunlight to prevent cloudiness. If the water looks murky over time, remake it with fresh materials.
mason jar snow globe no water
A mason jar snow globe without water is a simple DIY craft that creates a decorative scene inside a sealed mason jar using dry materials instead of liquid for safety and ease. To make one, gather these materials: a clean mason jar with lid, small figurines or ornaments, white glitter or Epsom salt for snow, hot glue or epoxy, and optional decorations like miniature trees or beads.
Start by gluing the figurines securely to the inside of the jar's lid using hot glue or epoxy, arranging them as desired. Once the glue sets, add a layer of glitter or Epsom salt around the base of the figurines on the lid. Screw the lid onto the jar tightly to seal it. When you shake the jar, the dry snow will swirl around the scene without needing water. This version is kid-friendly, doesn't leak, and can be customized for holidays or themes.
diy mason jar snow globe with glycerin
To make a DIY mason jar snow globe with glycerin, gather these materials: a clean mason jar with a lid, distilled water, glycerin, fine glitter, a small waterproof figurine or ornament, and strong waterproof glue. First, apply glue to the bottom of the figurine and attach it securely to the inside of the jar lid, then let it dry completely. Next, fill the jar almost to the top with a mixture of distilled water and glycerin—use about a 2:1 ratio of water to glycerin to help the glitter fall slowly. Add a teaspoon or two of glitter to the jar, depending on how snowy you want it. Screw the lid on tightly, making sure it's sealed to prevent leaks. Shake the jar gently to mix everything and enjoy the snow globe effect; if needed, adjust the water level or add more glycerin for better glitter suspension.
mason jar snow globe craft for kids
Gather the following materials: a clean mason jar with a lid, a small waterproof figurine or ornament, white glitter or fake snow, distilled water, clear glue or glycerin, and a hot glue gun for adults to help with.
Start by using the hot glue gun to attach the figurine securely to the inside of the jar's lid, then let it dry completely. Next, fill the jar almost to the top with distilled water. Add a few tablespoons of glitter and a teaspoon of glycerin to make the glitter fall slowly. Stir in a bit of clear glue if you want the glitter to stick better. Carefully screw the lid on tightly, making sure it's sealed. Turn the jar upside down to test it, and shake gently to watch the "snow" fall around the figurine. Always have an adult handle the hot glue and sharp edges for safety.
diy snow globe
To make a DIY snow globe, you'll need a clean glass jar with a tight lid, distilled water, glycerin (for slowing down the glitter), fine glitter or fake snow, small waterproof figurines or decorations, and a hot glue gun.
Start by gluing your figurines securely to the inside of the jar's lid using the hot glue gun; let it dry completely.
Fill the jar about three-quarters full with distilled water, then add a few tablespoons of glycerin (adjust for desired snow speed) and a teaspoon of glitter. You can add more glitter if you want a snowier effect.
Carefully screw the lid onto the jar, making sure it's watertight. If needed, seal the edges with additional hot glue for extra security.
Turn the jar upside down to test—shake gently to see the glitter swirl like snow around the figurines. Store it upright when not in use to keep everything in place.
how to make a snow globe without glycerin
To make a snow globe without glycerin, start by gathering a clean glass jar with a tight lid, small waterproof figurines or decorations, glitter or fake snow material like white craft glitter or epsom salt, distilled water, and strong waterproof glue or sealant.
Clean the jar and dry it completely. Place your figurines inside the jar at the bottom, arranging them as desired.
Add the glitter or fake snow to the jar, using about 1 to 2 teaspoons depending on the jar size, to create the snow effect.
Fill the jar almost to the top with distilled water, leaving a little space at the top to avoid overflow when sealing.
Carefully glue the lid onto the jar using the waterproof glue, making sure it's sealed tightly to prevent leaks.
Let the glue dry completely, which may take several hours or overnight.
Once dry, shake the jar gently to see the snow effect; if the glitter falls too quickly, you can experiment with adding a small amount of clear dish soap to the water in future attempts to slow it down, but avoid overdoing it to keep the water clear.