A crucial aspect of graduation ceremonies!
Graduation tassels are a traditional symbol of academic achievement, and there are specific rules or customs surrounding their use. Here are some common guidelines:
1. **Color:** The color of the tassel typically indicates the level of degree being awarded. For example:
* Bachelor's degrees: Black or dark blue
* Master's degrees: Gold or orange
* Doctoral degrees: Purple or red
2. **Wearing the tassel:** Typically, students wear the tassel on the right side of their mortarboard cap until graduation day.
3. **Moving the tassel:** After the student has completed their degree requirements and are officially awarded their diploma, they move the tassel from the right to the left side of the cap to signify completion of their academic journey.
4. **Tassel etiquette:** Some universities have specific guidelines for tassel usage during the ceremony. For example:
* Keep the tassel on the right side until the announcer calls your name or the degree is officially conferred.
* Move the tassel to the left side immediately after receiving your diploma, as a symbol of your new status as a graduate.
5. **Tassel handling:** Be mindful of how you handle the tassel during the ceremony. Avoid touching or adjusting it excessively, as this may be seen as disrespectful to the academic tradition.
6. **Keeping the tassel:** After graduation, many universities encourage students to keep their tassel as a memento of their achievement.
Remember, specific rules and customs surrounding graduation tassels may vary depending on your institution's traditions and policies. It's always a good idea to check with your university or department for any specific guidelines or expectations.
A question that has sparked debate and tradition for many years!
In general, the tradition is to wear the tassel on the right side of your mortarboard cap if you're a high school graduate. Here's why:
1. **Historical significance**: The origin of wearing the tassel on the right side dates back to the early 20th century in the United States. It's believed that the tradition started at Yale University, where graduates wore their mortarboards with the tassels on the right side as a symbol of their academic achievements.
2. **Custom and tradition**: Over time, other colleges and universities adopted this tradition, and it became a standard practice for high school and college students to wear their caps and gowns with the tassel on the right side.
3. **Meaning behind the tassel**: The tassel is often seen as a symbol of academic achievement, and wearing it on the right side is thought to represent the student's "right" to graduate and move forward in life.
Of course, there may be variations or exceptions depending on your school's specific traditions or policies. But generally speaking, the tassel goes on the right side for high school graduates!
A question that has sparked debate and discussion among Redditors!
"What side does the tassel go on?" is a popular thread on Reddit's r/AskReddit community, where users share their opinions and experiences. The thread was started by a user who asked whether the tassel on a mortarboard should be worn on the left or right side.
The responses were overwhelmingly in favor of wearing the tassel on the right side (about 70-80% of respondents). Many argued that this is because:
1. It's traditional: According to some, the tradition is to wear the tassel on the right side, and many institutions or cultures have adopted this convention.
2. Symbolism: Some users pointed out that wearing the tassel on the right side symbolizes moving forward and leaving the past behind, which is fitting for a graduation ceremony.
3. Aesthetics: Others simply found the look more pleasing when the tassel was worn on the right side.
However, about 20-30% of respondents disagreed, stating reasons such as:
1. It's arbitrary: Some users argued that there's no inherent significance to wearing the tassel on one side over the other.
2. Personal preference: Others simply preferred wearing the tassel on the left side for personal or aesthetic reasons.
The debate has since continued, with some users sharing their own experiences and insights from various cultures or institutions. While there may not be a definitive answer, the thread serves as a lighthearted example of how even seemingly trivial matters can spark interesting discussions online!
The tradition of wearing the graduation tassel on the correct side is indeed a significant part of academic ceremonies. Here's what it typically means:
**Before Graduation:** The tassel is worn on the right side (the "wrong" side) to symbolize the student's incomplete status or their journey toward graduation.
**After Graduation:** Once the graduate has earned their degree, they move the tassel from the right side to the left side, signifying that they have completed their academic program and are now a proud alumnus/alumna.
Congratulations on your upcoming graduation!
Wearing a graduation cap and tassel is a significant part of the ceremony, and here's a quick guide on how to wear them:
**Cap:**
1. The cap should sit level on top of your head, with the flat side facing forward.
2. Adjust the cap so that it is snug but not too tight. You want to be able to take it off easily when needed.
3. Make sure the cap is securely fastened under your chin with the Velcro or elastic band.
**Tassel:**
1. The tassel should hang down from the back of the cap, usually around 2-3 inches (5-7.5 cm) below the cap's edge.
2. If your school has a specific color for graduates, make sure the tassel is facing the correct direction (usually towards the front).
3. For the ceremony, keep the tassel in its default position, hanging down from the back of the cap.
**Important:** Before the ceremony, make sure to check with your school or advisor about any specific regulations regarding the tassel's color or orientation. Some schools may have unique traditions or guidelines for wearing the tassel.
**Tips:**
1. You can adjust the tassel's length by sliding it up or down on the cap's attachment point.
2. Be mindful of the tassel when walking or sitting, as it can get in the way or become tangled.
3. Take a moment to admire your new attire and the significance of this milestone before the ceremony!
I hope that helps! If you have any more questions or concerns, feel free to ask.
For a Doctoral degree, the graduation tassel is typically worn on the right side of the mortarboard cap. This is because the doctoral degree is considered the highest academic achievement, and the right side represents the completion of the doctorate.
Here's a general guideline:
* Bachelor's and Master's degrees: Wear the tassel on the left side of the mortarboard.
* Doctoral (Ph.D.) degrees: Wear the tassel on the right side of the mortarboard.
It's worth noting that some institutions or programs may have specific traditions or customs regarding the wear of the graduation tassel, so it's always a good idea to check with your university or department if you're unsure.
You're referring to the famous "Turning of the Tassel" script!
The script I believe you are referring to is one written by Steve Harvey, an American comedian and television host. The script is often referred to as the "Turning of the Tassel" because it's a humorous take on the traditional graduation ceremony.
In the script, Harvey pokes fun at the pomp and circumstance surrounding graduations, using his signature wit and humor to bring attention to what he believes are some of the absurdities of the commencement tradition. The script is often performed as a monologue during graduation ceremonies, and it has become a popular and iconic piece of comedy.
Here's an excerpt from the script:
"You know, I was thinking, have you ever noticed that when you graduate, they give you a tassel? And then, they turn it! Like, what are we doing?! 'Hey, kid, you made it! Now, let's take this little piece of cloth and flip it around!' It's like, 'What is the meaning of life? Is it to wear a fancy hat and turn a tassel?'"
The script has been widely shared and performed over the years, and it remains a beloved and iconic piece of comedy in American culture.
The graduation cap tassel is a long, flowing piece of fabric that hangs from the graduation cap. The tassel typically has two ends: one end with a knot and a dangling thread (called the "dropped" end), and another end tied to the graduation cap itself. Traditionally, the color of the tassel has significance:
1. **Black:** Typically indicates that the student is graduating with a bachelor's degree in the humanities or social sciences.
2. **Gold or Yellow:** Symbolizes excellence, achievement, and high honors. It may indicate that the student graduated summa cum laude (with highest honor), magna cum laude (with great honor), or cum laude (with honor).
3. **White:** Often represents a bachelor's degree in the sciences.
4. **Green:** May signify a degree in agriculture, environmental science, or a related field.
5. **Purple:** Can represent a degree in fine arts, music, or a related field.
It's essential to note that tassel colors may vary depending on the institution, department, or program. Some institutions might have specific rules or traditions regarding tassel colors, so it's always best to check with your university or college for any specific guidelines.
In some cases, the color of the tassel might also indicate a specific achievement, such as:
* A **red** tassel may signify that the student has completed an honors program or received a special award.
* A **blue** tassel could represent a degree in engineering, computer science, or a related field.
Remember to check with your institution for any specific rules or traditions regarding graduation cap tassels.