Mathtype和Word輸入的易錯點

Mathtype和Word輸入的易錯點

03:57來自LearningYard學苑

Mathtype部分

01Mathtype的括號使用

輸入公式時括號必須使用mathtype裡自帶的。如圖 1所示。

When entering the formula, the parentheses must be used in the mathtype. As shown in Figure 1.

圖1

02Mathtype的省略號使用

省略號輸入必須使用mathtype自帶的。如圖 2所示。

When entering the formula, the ellipsis must be used in the mathtype. As shown in Figure 2.

圖2

03Mathtype的上下標使用

上下標的輸入必須使用mathtype自帶的。如圖3所示。

When entering the formula, the subscripts must be used in the mathtype.As shown in Figure 3.

圖3

04Mathtype的自動編號的使用

第一步,先設置編號格式.在word的工具欄點擊mathtype，點擊「Insert number」下拉選項中的「format equation numbers」選項設置編號格式。如圖 4所示。

The first step is to set the number format first. Click mathtype on the word toolbar, and click the "format equation numbers" option in the "Insert number" drop-down option to set the number format. As shown in Figure 4.

圖4

然後進入了設置編號格式的頁面，因為我的文獻裡不需要章節的格式，所以直接選擇公式編號，並且可以在「preview」看到呈現的格式。如圖 5所示。

Then I entered the page for setting the number format, because my document does not need the chapter format, so I directly select the formula number, and you can see the displayed format in "preview". As shown in Figure 5.

圖5

第二步，編號格式設置好後，將光標置於插入公式的位置，因為文獻的不同需要，我選擇了右對齊，點擊「Right-numbered」進入公式編輯頁面，則公式編號就會自動右對齊。如圖 6所示。

The second step, after setting the numbering format, place the cursor at the position where the formula is inserted. Because of the different needs of the literature, I chose right-aligned. Click "Right-numbered" to enter the formula editing page, and the formula number will automatically be aligned to the right . As shown in Figure 6.

圖6

Word部分

01參考文獻的引用

首先確保參考文獻的的編號是自動生成的，不是手動輸入的。然後將光標置於引用的語句後面，點擊工具欄的「引用」中的「交叉引用」，如圖 7所示。

First, make sure that the reference number is automatically generated and not entered manually. Then place the cursor behind the quoted statement, and click "Cross Reference" in the "Reference" of the toolbar, as shown in Figure 7.

圖7

然後「引用類型」選擇「編號項」，「引用內容」選擇「段落編號」，然後選擇引用的對應的文獻。如圖 8所示。

Then select "Number Item" for "Citation Type", select "Paragraph Number" for "Citation Content", and then select the corresponding document cited. As shown in Figure 8.

圖8

然後調整參考文獻編號的格式，選中引用的參考文獻編號，如圖 9所示。然後點擊「開始」中的「上標」，最後得到正確的格式，如圖 10所示。

Then adjust the format of the reference number, select the cited reference number, as shown in Figure 9. Then click "Superscript" in "Start", and finally get the correct format, as shown in Figure 10.

圖9

圖10

02多級標題的設置

首先在菜單欄裡點擊「多級列表」中的「定義新的多級列表」，如圖 11所示。

First, click "Define a new multi-level list" in the "Multi-level list" in the menu bar, as shown in Figure 11.

圖11

然後點擊「更多」修改各級別標題的設置，如圖 12所示。

Then click "More" to modify the settings of each level heading, as shown in Figure 12.

圖12

將一級標題的設置為「標題一」和「級別一」，「編號之後」設置為「空格」，如圖 13所示。

Set the first level heading to "Title One" and "Level One", and set "After Numbering" to "Space", as shown in Figure 13.

圖13

將二級標題的設置為「標題二」和「級別二」，「編號之後」設置為「空格」，如圖 14所示。

Set the second-level heading to "Title 2" and "Level 2", and set "After Numbering" to "Space", as shown in Figure 14.

圖14

將三級標題的設置為「標題三」和「級別三」，「編號之後」設置為「空格」，如圖 15所示。

Set the three-level headings to "Heading Three" and "Level Three", and set "After Numbering" to "Space", as shown in Figure 15.

圖15

設置完成後，選中一級標題，點擊菜單欄的「標題一」；選中二級標題，點擊菜單欄的「標題二」；選中三級標題，點擊菜單欄的「標題三」。如圖 16、圖 17、圖 18所示。After setting, select the first-level heading and click "Title 1" in the menu bar; select the second-level heading and click "Title 2" in the menu bar; select the third-level heading and click "Title 3" in the menu bar. As shown in Figure 16, Figure 17, Figure 18.

圖16

圖17

圖18

圖19

最後得到三級標題的格式。同時可以在菜單欄的「樣式」裡修改各級標題的字體大小。如圖 20所示。

Finally, the format of the three-level heading is obtained. At the same time, you can modify the font size of all levels of headings in the "Style" of the menu bar. As shown in Figure 20.

圖20

03插入題注的使用與引用

首先選中需要插入題注的圖片或表格，點擊右鍵，選擇「插入題注」。如圖 21所示。

First select the picture or table where you want to insert a caption, right-click, and select "Insert Caption". As shown in Figure 21.

圖21

然後進入插入題注的設置，「標籤」的選擇以及位置圖的標籤在項目下方，表的標籤在項目的上方，在「題注」後面輸入圖和表的名字。如圖 22、圖 23所示。

Then enter the setting of inserting the caption, the selection of "label" and the label of the position map are under the item, the label of the table is above the item, and the name of the graph and table is entered after the "caption". As shown in Figure 22 and Figure 23.

圖22

圖23

如果標籤在選項裡沒有就點擊「新建標籤」，創建需要的圖表名稱。如圖 24所示。

If the label is not in the options, click "New Label" to create the desired chart name. As shown in Figure 24.

圖24

文中圖表的交叉引用。將光標移到文中引用圖表的位置，然後點擊菜單欄的「題注」的「交叉引用」。如圖 25所示。

Cross-references to diagrams in the text. Move the cursor to the position where the chart is quoted in the text, and then click "Cross Reference" under "Caption" in the menu bar. As shown in Figure 25.

圖25

選擇引用的題注，「引用類型」選擇圖表的標籤，引用內容選擇「只有標籤和編號」，點擊「插入」後即完成。如圖 26所示。

Select the caption to be quoted, select the label of the chart for "Reference Type", select "Label and Number Only" for the quoted content, and click "Insert" to complete. As shown in Figure 26.

圖26

04自動生成目錄的使用

首先確保正文所有的內容中,標題已分級,正文內容「大綱級別」屬於「正文文本」，所有的頁碼已經自動編號。一切準備就緒後，點擊菜單欄中「引用」中的「目錄」，根據格式需要選擇所需要的自動生成的目錄樣式。如圖 27所示。

First of all, make sure that in all the content of the main text, the title has been graded, the main content "Outline Level" belongs to the "Main Text", and all page numbers have been automatically numbered. After everything is ready, click "Catalog" in "Reference" in the menu bar, and select the automatically generated catalog style you need according to the format requirements. As shown in Figure 27.

圖27

學以致用。以上小編提到的關於Mathtype和Word的都是我們實際操作過程中易錯的點，在我們運用的時候，都要注意別犯這些小錯誤。

Apply what you have learned. The above mentioned in the editor about Mathtype and Word are the points that are easy to make mistakes in our actual operation. When we use them, we must pay attention not to make these small mistakes.

今天的分享就到這裡了。如果您對今天的文章有獨特的想法，歡迎給我們留言，讓我們相約明天，祝您今天過得開心快樂！

That's it for today's sharing. If you have unique ideas about today’s article, please leave us a message, let us meet tomorrow, and wish you a happy day today!

參考資料：百度、Google翻譯

本文由LearningYard學苑原創，部分圖片及文字來源於網絡，若有侵權請聯繫刪除。歡迎關注，帶你一起漲知識！